high temperature stainless 600 steel plate

410 - Rolled Alloys, Inc.

410 stainless is a corrosion and heat resistant 12% chromium steel. It is the most widely used of the hardenable stainless steels. Heat treated 410 has mechanical properties comparable to the engineering alloy steel AISI 4130, coupled with the additional benefit of good corrosion resistance. 410 is highly resistant to atmospheric corrosion. Alloy 800H/800HT - Stainless Steel, Nickel Alloy Plate

  • General PropertiesCreep and Rupture PropertiesOxidation ResistanceCorrosion ResistanceAlloys 800H (UNS N08810) and 800HT (UNS N08811) are dual-certifiable Nickel-Iron-Chromium materials that resist oxidation, carburization and other high temperature corrosion. The chemical composition of the two alloys are identical to Alloy 800 (UNS N08800), with the exception of the higher level of carbon present in both grades (0.050.10%) in alloy 800H, and (0.060.10%) in alloy 800HT. Alloy 800HT also has an addition of up 1.0 % aluminum and titanium. In addition to the chemistry restriPlate - Rolled Alloys, Inc.416 stainless steel is a free-machining martensitic stainless steel with 12-13% chromium that can be hardened by heat treatment to higher strength and hardness levels. In the annealed condition, it has

    Composition/Properties SSINA

    Stainless steels are used at temperatures up to 1700° F for 304 and 316 and up to 2000 F for the high temperature stainless grade 309(S) and up to 2100° F for 310(S). Stainless steel is used extensively in heat exchangers, super-heaters, boilers, feed water heaters, valves and main steam lines as well as aircraft and aerospace applications. HIGH-TEMPERATURE CHARACTERISTICS OF STAINLESS requirements of high-temperature service. This booklet discusses factors that should be considered by engineers facing problems in designing equipment for high-temperature service. The characteristics that make some of the stainless steels particularly useful in high-temperature environments are described, and typical engineering data are High temperature steel - IMOAThe modified 9 % Cr steel T/P91 (EN designation:X10CrMoVNb9-1) invented in the USA is now used in power plants all over the world, both in new plants and in refurbishment work of high-pressure/high-temperature piping systems. Although the carbon content of T/P91 is lower than that of X20CrMoNiV11-1, its creep rupture strength is distinctly higher.

    Metals & Alloys for High-Temperature Services

    602A is an austenitic heat resistant alloy that displays superior strength in the face of temperatures of up to 1200 degrees C, (2200 degrees F). In fact, its the single strongest and most oxidation resistant wrought alloy currently available for service above 1040 degrees C (1900 degrees F). Nickel Alloy And High Temperature Metals Supplier In IndiaNickel & High Temp Alloys Sheets and Plates at best price We Also Stock Inconel Incoloy 600, 625, 800, 825 Round Bar, Pipe, Tube, Plate Of Following Brands Stainless Steel - Grade 253MA (UNS S30815)

    • Key PropertiesCompositionMechanical PropertiesPhysical PropertiesGrade Specification ComparisonPossible Alternative GradesCorrosion ResistanceHeat ResistanceHeat TreatmentWeldingThese properties are specified for flat rolled product (plate, sheet and coil) as Grade S30815 in ASTM A240/A240M. Similar but not necessarily identical properties are specified for other products such as pipe and bar in their respective specifications.Inconel® Alloys - American Special MetalsThe Inconel® Alloys are highly engineered to offer a superior combination of heat resistance, high temperature corrosion resistance, toughness and strength for the most demanding applications. Information on the physical and mechanical properties of these products, the most comprehensive range of alloy composition s and product forms available

      Stainless Steel - High Temperature Resistance

      Jan 08, 2002 · This expansion coefficient not only varies between steel grades, it also increases slightly with temperature. Grade 304 has a coefficient of 17.2 x 10-6 /°C over the temperature range 0 to 100°C but increases above this temperature. The effect of thermal expansion is most noticeable where components are restrained, as the expansion results in buckling and bending.600 Series Stainless Steel Overview, Properties, and The 600 series stainless steel alloys are used for applications that require corrosion and high-temperature resistance.The alloy series also has excellent mechanical properties and offers a desirable combination of high strength and good workability. Another advantage of the 600, is its higher nickel content provides a lower predisposition for stress corrosion cracking in the annealed condition.