product datasheet mechanical specification

32 Amp, 2 Line, Tempest Power Filter Standard

Filter Standard Specification [email protected] Product Datasheet EMP/FIL/TECH 5016 01/21 V2 About Us EEP Filters Limited is a leading developer and manufacturer of EMC and EMP Filters. Encompassing over 50 years experience in power electronic design and development, our focus is on high performance, high power and bespoke filter 7100 M.2 NVMe PCIe SSD - Micron TechnologyVital Product Data (VPD) over SMBus for drive management SMART command set support Temperature4 0°C to 70°C operating temperature -40°C to 85°C non-operating Temperature protection Mechanical/electrical 22.00 x 110.00mm, 3.3V ±5% Shock:1500G at 0.5ms Vibration:3.08 GRMS 7800Hz Controller Features NVMe controller

Data Sheet:6063 - T6 Extrusions Wilsons

Data Sheets Technical specs. Search & Download. Tools This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. Features - Farnell element14TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics own data and is considered accurate at time of going to print. Features:16 mm onductive plastic element 100,000 cycle life Metal shaft/bushing Multi-ganged available Newport 301 Product Data Sheet - carbon tubeNewport 301 Product Data Sheet ©2006, 2010 Newport Adhesives and Composites, Inc PL.NB-301.071310.doc All rights reserved. Typical NCT 301 Carbon Unitape Mechanical Property Values (Results are as tested, not normalized). NCT301 (AS4 fiber) Test Method RT* 0° Tensile strength, ksi 300 0° Tensile modulus, Msi ASTM D-3039 18.5

PRODUCT DATA SHEET C2800 - Werlatone

Electrical Specifications:Frequency:0.5 - 32 MHz Power:5000 W CW Coupling:50 ± 1.0 dB Max. Insertion Loss:0.05 dB Max. Flatness:± 0.5 dB Max. VSWR (ML):1.15:1 Max. Directivity:20 dB Min. Mechanical Specifications:Type:Connectorized Material:Aluminum 6061-T6 Surface Finish:Chem. Film Per MIL-DTL-5541F Type I Class 3 (Yellow Iridite) Product Data Sheet - TisiraTOT644E Product Data Sheet Page 1 Model:TOT644E Code:9351116002336 Product Data Sheet TOT644E Product Features 600 Electric 4 Function Oven Stainless Steel Control Panel Mechanical Timer (90min) 66L Capacity Triple Glazed Door (Low-E Glass) Inclusions:1 Shelf, 1 Baking Tray & Insert Product Specifications Oven Functions Defrost Fan-Forced Fan-Assisted Grill Product datasheet - StartseiteProduct datasheet Curtain-type dock shelter with parallel guide system Type:PMV Contact:Page 2/ 7 We reserve the right to alter technical specifications. Mechanical dock shelter (PMV) The mechanical dock shelter PMV is a new product of PROMStahls wide product range. Various dimensions

TIVAR 1000 antistatic - MCAM

Mechanical Properties at 23 °C (7) 40 x 10-6 Tension test (8):- tensile strength (9) ISO 527-1/-2 MPa 20 - tensile strain at yield(9) ISO 527-1/-2 % 15 - tensile strain at break (9) ISO 527-1/-2 % > 50 - tensile modulus of elasticity (10) ISO 527-1/-2 MPa 790 Compression test (11): Technical DaTa SheeT Polyethylene - Laminated Plasticsuse as a asis or esign specifications or uality control contact us or anuacturers coplete aterial property atasheets. all alues at F (c) unless otherwise note. Technical DaTa SheeT Polyethylene (PE) Polyethylenes are semi-crystalline materials with excellent chemical resistance, good fatigue and wear resistance and a wide range of properties.Specifications, Standards, and Product Data Sheets The data sheet provides you with the physical properties or specifications of the product, defines where or how the product should be used, and details the expected performance of the product. This, in turn, provides you with the information needed to compare competing products and to take performance differences into consideration when evaluating cost differences.