astm a709 grade 100 specs
Gangsteel Grade :A709 Grade 100. Specification:Thickness 8mm-300mm, Width:1500-4020mm, Length:3000-27000mm. Standard:ASTM A709:Standard Specification for Structural Steel for Bridges A709 Structural, Carbon & HSLA Steel Plate - Chapel SteelA709 is the specification used for steel plate used in the manufacture of bridges. Chapel Steel stocks A709 Grade 36, A709 Grade 50 and A709 Grade 50W.
A709 Grade 100W steel grade is a high strength low alloy structural carbon steel used in ASTM A709 Steel, grade 50 and 50W, 100 mmASTM A709 Steel, grade 50 and 50W, 100 mm Categories:Metal; Ferrous Metal; Alloy Steel; Low Alloy Steel; ASTM Steel; Carbon Steel; Low Carbon Steel. Material ASTM A709/A709M-17e1 - Standard Specification for Product availability is shown in Table 1. (A) Manganese content of 0.85 to 1.35 % and silicon content of 0.15 to 0.40 % is required for shapes with flange thickness over 3 in. [75 mm]. (B) For each reduction of 0.01 % below the specified carbon maximum, an increase of 0.06 % manganese above the specified maximum will be permitted up to a maximum of 1.35 %.
Grade 50W [345W], or HPS 50W [HPS 345W] shall not be substituted for Grades 36 , 50  or 50S [345S] without agreement between the purchaser and the supplier. 1.3 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. ASTM-A709, 2001 - MADCADASTM A709/A709M-01 Historical Standard:ASTM A709/A709M-01 Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges SUPERSEDED (see Active link, below) Keeping tabs on current ASTM specifications ARE YOU availability should be confirmed prior to specification. ASTM A709 provides toughness levels for three exposures and two uses. Much material supplied to Gr. 50 50 65-100 Gr. 55 55 70-100 A709 36 36 58-80b A1043d 36 36-52 58 50 50-65 65 High-Strength Low-Alloy A572 ASTM A514 Grade 90 or 100 or ASTM A852. Structural plates with
ASTM A709 Grade 50CR, also known as ASTM A1010, is a structural steel developed to address the corrosion issues associated with the use of traditional weathering steels, especially in environments involving combined prolonged wetness and chlorine salts.ASTM A709/ A709M Grade 100 High-Strength Low-Alloy Details:TJC Steel can supply A709 Grade 100/ A709 Gr100 High-Strength Low-Alloy Structural Steel Plate, mainly used in bridges building. Production Size:Thickness:4mm- 400mm; Width:1000mm- 4000mm; Length:4000mm- 12000mm. Production ability:10000 Tons Per Month.