thickness laser cutting stainless steel plate
Key words:Stainless Steel-304, Strength, surface roughness, kerf width, DOE, genera tic algorithm. I. INTRODUCTION The first laser was invented in 1960. It was an optical pumped laser using a ruby crystal as gain medium. Since then the technology have been in constant development. In 1967 laser cutting was demonstrated for the first time. Custom Waterjet vs. Laser Cutting FedTechThe jet streams generated are capable of cutting material ranging from.0005" thick to 12" thick. Waterjet cutting is most commonly used for cutting aluminum, thick carbon steel and stainless steel, copper, brass, titanium, plastic, and rubber.
Feb 09, 2018 · Stainless steel cuts well-using nitrogen and traditionally and can cut up to 15mm on a 6kw CO2 machine. Will leave burrs above 10mm but if the setup is good the burring will be minimal. With 10kW Fiber laser technology cutting up to 30mm thick can be achieved and similar to Aluminium, 40mm can also be achieved with the right expertise. Laser Cutting Metal Services - We can Cut Steel Sheet as Laser cut metal is a processed metal by laser cutting technology. Metal materials mainly types in sheet metal (steel plate) and fabricated in carbon, alloy or stainless steel.About laser cutting. Laser cutting is to cut different materials especially steel metals with the help of laser beam. Welding of thick stainless steel plates up to 50 mm with Mar 28, 2011 · Thick-section stainless steels are widely used in the components and structures for nuclear power plants. Laser welding is being considered as a high-efficiency method instead of arc welding for some components, so as to improve the production efficiency and reduce the residual stresses of the heat-affected zone. In this paper, multipasses narrow-gap welding of 50 mm thick Type 316L plates
Our state-of-the-art laser cutting system is capable of cutting stainless and nickel alloy plates and unique patterns through 1.25" (31.8mm) thick. Ultra high speed piercing up to .75" (19mm) and a gas optimization system enable the NC controller to cut different thicknesses of