nitronic 50 xm 19 high strength 22 13 5 marine alloy

ARMCO NITRONIC 50

ARMCO NITRONIC 50 does not become magnetic when cold (-320 1200 °F), according to Section VIII of the ASME Boiler and worked or cooled to sub-zero temperatures. High-Strength (HS) ARMCO NITRONIC 50 Stainless Steel has a yield strength about three to four times that of Type 316 stainless steel. Composition (wt %) Carbon (C) 0.06 max. Alloy 50 AMS 5764 XM-19 Stainless Steel High Alloy:Specifications:22-13-5 UNS S20910 Alloy 22-13-5 ALLOY 50 Cast Grade:CG6MMN Cast:UNS J93790 Wrought:UNS S20910 N50 Stainless Ni 50 stainless steel XM19 XM-19 XM-19 Stainless Steel Type XM-19 Cr 22, Ni 12.5, Mn 5, Mo 2.25, Si 1 C 0.06 Fe bal W.-No. 1.3964:Bar AMS 5764 ASME SB479 ASTM A193 Gr B8R ASTM A194 ASTM A276 Gr XM-19 ASTM A479 Gr XM-19

Fermonic® 50 Annealed (UNS S20910 XM-19) - Langley

Fermonic® 50 Annealed (UNS S20910 XM-19) is nitrogen strengthened to deliver almost double the strength of common austenitic stainless steels. It is also known as Nitronic ® 50 a trademark owned by AK Steel Corporation. Nitronic 50 (UNS S20910) DANYANG HB SPECIAL ALLOY Nitronic 50 (XM-19), or N-50 is a high strength and good corrosion resistant austenitic stainless steel. It has nearly double the yield strength of 304 and 316 stainless steel and has better corrosion resistance than 317L stainless steel. N50 Stainless remains non-magnetic even after being severely cold worked. It maintains strength at high temperatures as well as sub-zero temperatures. Nitronic 50 Bar, Nitronic 60 Bar Stock, Nitronic 50 Flat Offering the widest range of high quality ASTM A276/ASTM A479/AMS 5764 NITRONIC 60 (Alloy 218, UNS S21800) / AMS 5848 / NITRONIC 50 (XM-19) High Strength 22-13-5 Marine Alloy (UNS S20910) Round bar & Flat Bar Rapid Delivery With Best Price.

Nitronic 50 Premium Alloys

  • SynopsisResistanceProcessingNitronic 50 is an austenitic premium stainless steel that provides better corrosion resistance than 300 or 400 series stainless. The combination of strength, superior corrosion resistance, and low magnetic permability makes this alloy a top choice for high-risk applications such as medical implantations. It also remains non-magnetic in cold environments, unlike other austenitic grades. Nitronic 50 is also referred to as XM-19 and UNS S20910.Nitronic® 50 UNS S20910 Ulbrich
    • ApplicationsDescriptionChemistry TypicalPhysical PropertiesProperties:TemperedFinishesWire FinishesWeldingNitronic 50® Stainless Steel is for the petroleum, petrochemical, chemical, fertilizer, nuclear fuel recycling, pulp and paper, textile, food processing and marine industries. Components where the combination of excellent corrosion resistance and high strength are required including pumps, valves and fittings, fasteners, cables, chains, screens and wire cloth, marine hardware, boat and pump shafting, heat exchanger parts, springs and photographic equipment.A METAL SOURCE, LLC Nitronic 50 Alloy Steel Rectangular A METAL SOURCE, LLC is a distributor of Nitronic 50 Alloy Steel Rectangular Flat Bar form in any size per specifications as noted below. Nitronic 50 Alloy is an Austenitic Stainless Steel with greater corrosion resistance and greater strength than 316 or 316L Stainless Steel grades and commonly used in the industries such as petroleum, petrochemical, chemical, marine, medical implants, fertilizer, Nitronic 50 Round Bar Price Supplier & Manufacturer Nitronic 50 (XM-19, UNS S20910) is known for its excellent high strength and good corrosion resistant authentic stainless steel. It has nearly double the yield strength of 304 and 316 stainless steel and has better corrosion resistance than 317 stainless steel. Nitronic 50 stainless steel remains non-magnetic even after being severely cold worked. Nitronic® 50 High Strength (UNS S20910, XM19)NaCI fog exposure testing, Nitronic® 50 in both annealed and high strength conditions exhibited resistance to general corrosion and pitting exceeding that of 316L. MAGNETIC PERMEABILITY Nitronic® 50 does not become magnetic when cold worked. The magnetic permeability of the alloy remains low even at cryogenic temperatures to below -400F. MACHINING Because of the high strength of Nitronic® 50

      XM-19 - National Specialty Alloys

      UNS S20910 (XM-19) Nitronic 50 ® stainless steel, also known as UNS S20910 and XM-19, is an austenitic stainless steel with a blend of strength and corrosion resistance that is better than Stainless Steels 316, 316/316L, 317, and 317/317L. In fact, XM-19 has twice the yield strength at room temperature compared to Stainless Steels 316/316L and 317/317L.NITRONIC® 50 (XM-19) High Strength 22-13-5 Marine Alloy NITRONIC® 50 (XM-19) High Strength 22-13-5 Marine Alloy (UNS S20910) Fe 57, Cr 22, Ni 13, Mn 5, Mo 2, Si 1. NITRONIC 50 - High Strength XM-19. Nitrogen strengthened with Moly performs well in marine, and chemical service. Commonly used for shafting, housing and liners. ASTM A276 A479 UNS S20910 ni50 n50.