precision tolerance cold rolled aisi 1010 steel
0.010 Steel Shim Stock 6 x 100 Roll. UPC CODE:16450. PBP CODE:16A10. Steel Shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim:material type, material thickness, and lot # for full traceability. 1008 vs 1010 Steel Comparison Capital Steel & Wire1010:Tensile Strength:49,000 psi:53,000 psi:Yield Strength:41,500 psi:44,000 psi:Elongation (2") 20%:20%:Reduction in Area:45%:40%:Brinell Hardness:95:105
Sometimes referred to as Shim Stock, Cold Rolled 1010 Steel is oiled to resist rust and stain. Typically utilized in tool and die shops, machine repair and bearing adjustments, Cold Rolled 1010 Steel is rolled to precision tolerances. Cold Rolled 1010 Steel is used in low strength applications. Overall, it has good machinability and can be AISI 1030 Carbon Steel (UNS G10300) - AZoMAISI 1030 carbon steel is heat treated at 816 to 871°C (1500 to 1600°F) and quenched in water. This process is followed by a tempering treatment. Forging. AISI 1030 carbon steel is forged at 982 to 1260°C (1800 to 2300°F). Hot Working. Hot working of AISI 1030 carbon steel is performed at 93 to 482°C (200 to 900°F). Cold Working Cold Rolled Sheet Steel and Coil Steel InventoryBrowse our cold rolled steel stock items, available in 1008 or 1010 alloys, and various tempers, gauges, and ASTM specs. Request a quick quote for more details.
Cold rolled steel sheet for drawing and forming applications is produced in a broad spectrum of grades meeting specifications as listed in the tables below. The most suitable specification can be selected, depending on the intended end-use and severity of fabrication. Cold Rolled Strip & Shim Steel Stock - 1008 & 1010 Lapham-Hickey Steel carries cold rolled strip and shim steel. Our selection includes all tempers, brite & matte finishes, and close tolerances on all gauges. Cold Rolled Strip & Shim Steel. Tempers:AKDQ, Soft, Quarter Hard, Half Hard, Full Hard. Grades:1008/1010. Thickness in Stock:.003" through .250". Widths in Stock:.125" through 60". Precision Brand 16A1 Steel Shim Stock AppliedShop Precision Brand 16A1 at Applied, which includes; .001" x 6" x 100", Full Hard, Cold Rolled 1010 Steel, #2 Bright Finish, RB90-100 Rockwell Hardness, +/- 10% Thickness Tolerance, Meets ASTM A-109 & AISI 1010.
Full hard, cold rolled steel shim stock Other thicknesses available Pack of 10 PKG Manufacturer part number:16830 UPC Code:Unavailable AISI; ASTM Specifications:Hardness [Max] = 100 Rb Hardness [Min] = 90 Rb Length [Nom] = 18 in Material = Low Carbon 1008/1010 Steel Packing Type = Sheet Quantity = 10 per pack Tensil Stainless Steel Sheets, Cold Rolled Steel & Galvanized As a registered ISO 9001:2015 company, Rolled Steel Products state of the art equipment meets virtually any requirement in panel flat quality leveling, precision slitting, close tolerance sheet blanking, strip quality edge conditioning, precision shearing and complete cold reducing capabilities.AISI 1010 Carbon Steel (UNS G10100) - AZoMAug 23, 2012 · A stress relief anneal process can also be done at 538°C (1000°F) and then gradually cooled. AISI 1010 carbon steel in the full annealed condition has a tensile strength of about 45 ksi. Tempering. Tempering can be performed on AISI 1010 carbon steel, after hardening process is completed, at 316 to 593°C (600 to 1100°F).